Home Comfort

Comfort Solutions for Every Home

Low-cost, simple to install controls that improve comfort and save energy. Solves "The upstairs is too hot and the downstairs is too cold" problem. Solutions for new construction, aftermarket and light commercial.

The Comfort and Airflow Connection

A common problem found in most 2-story homes is that during the summer, the upstairs is too hot, and during the winter, making the downstairs comfortable overheats the upstairs.

The Comfort Problem

During the hot summer months, the upstairs needs more cooling. When cooling is activated, the downstairs space is cooled to its comfort temperature. The upstairs doesn't cool at the same rate and the upstairs temperature continues to rise even though cooling cycles on and off. The upstairs can be as much as 10 degrees hotter than the downstairs.

During the winter, the downstairs needs more heating. When heating is activated, the downstairs space is heated to its comfort temperature but the upstairs becomes overheated causing discomfort and wasted energy.

The Comfort365 corrects the problem by automatically or manually distributing more cooling airflow to the upstairs during the summer and distributing more heating airflow downstairs during the winter resulting in a uniformly comfortable home in every season.

The Comfort365 Airflow Solution

Lower Cost and Simple Installation

The Comfort365 is about half the cost of a zoning system and easier to install. It eliminates the bypass duct and bypass damper, the discharge air temperature sensor and installing a separate 24VAC transformer. Detailed cost and installation comparisons are available to qualified distributors and contractors.

Provides Comfort and Energy Savings

The Comfort365 saves energy during heating by distributing more heating airflow to the downstairs space and satisfying the call sooner.

The Comfort365 provides comfort by distributing more heating or cooling airflow to the space that needs it and less to the space that doesn't.

The Comfort365 saves energy at night by automatically or manually distributing more airflow to the upstairs sleeping space and less to the unoccupied downstairs space. 

2-Zone Comfort Solutions

C365T Series for New Construction

The C365T is a programmable, touch thermostat with integrated heating, cooling and airflow control that works with an upstairs temperature sensor and modulating dampers controlling airflow to the living and sleeping spaces. The C365T monitors the upstairs and downstairs temperatures and automatically directs more heating or cooling airflow to the space that needs it. Options for nighttime airflow control and manual airflow control.

C365A Series for Aftermarket

WC365 for New Construction and Aftermarket

The WC365 is a wireless wall control that works with a wireless module installed by the equipment that controls plug&play modulating dampers controlling airflow to the living and sleeping spaces. The homeowner manually directs more heating or cooling airflow to where it's needed.

Bluetooth BTMC365 for Aftermarket 

The BTMC365 is a Bluetooth module installed by the equipment that controls plug&play, modulating dampers controlling airflow to the living and sleeping spaces. Using a smart phone, the homeowner manually directs more heating or cooling airflow to where it's needed. Option for Auto Sleep mode.

Bluetooth BTAC365 for Aftermarket 

The BTAC365 is a Bluetooth module installed by the equipment that controls plug&play, modulating dampers controlling airflow to the living and sleeping spaces and works with wireless temperature sensors installed in the upstairs and downstairs spaces. The BTAC365 monitors the upstairs and downstairs temperatures and the equipment and automatically directs more heating and cooling airflow to the space that needs it. Option for manual airflow control and Auto Sleep mode.

The C365A is a programmable, touch thermostat with integrated heating, cooling and airflow control that  uses the existing thermostat cable and works with a wireless upstairs temperature sensor, and a wireless module installed by the equipment that controls plug&play, modulating dampers controlling airflow to the living and sleeping spaces. The C365A monitors the upstairs and downstairs temperatures and automatically directs more heating and cooling airflow to the space that needs it. Options for nighttime airflow control and manual airflow control.

1-Zone Comfort Solutions

WDC for Aftermarket

The WDC is a wireless wall control that works with a wireless module installed by the equipment that controls a plug&play, modulating damper controlling airflow to a space. The occupant manually increases or decreases airflow to the space to eliminate overheating or overcooling to improve comfort and energy savings.

Bluetooth BTDC for Aftermarket

The BTDC is a Bluetooth module installed by the equipment that controls a plug&play, modulating damper controlling airflow to the space. Using a smart phone, the occupant manually increases or decreases the airflow to the space to eliminate overheating or overcooling to improve comfort and energy savings.

WRCD for Aftermarket

The WRCD is a wireless remote control that works with a wireless damper controlling airflow to a space. The occupant manually increases or decreases airflow to the space to eliminate overheating or overcooling to improve comfort and energy savings.

MWC for Aftermarket

The MWC is a wired wall control that works with a wired variable position damper controlling airflow to a space. The occupant manually increases or decreases airflow to the space to eliminate overheating or overcooling to improve comfort and energy savings.

26072 Merit Circle #110

Laguna Hills, CA 92653

  • Facebook
  • YouTube

Don"t miss out!

Stay informed about new products and promotions.