Provides the same comfort as zoning at HALF the cost and eliminates all of the difficulties of installing a zoning system.

Model DC365
Wired, Automatic or Manual Airflow Control
for 2 Zones

New Construction

Aftermarket.jpg

Aftermarket

HOW IT WORKS

The DC365 is a wired solution that solves the comfort problem by manually or automatically directing more airflow to the upstairs or downstairs space. In Manual Airflow Control, simply push the up or down key to adjust airflow. In Automatic Airflow Control, the DC365 monitors the temperatures upstairs and downstairs and automatically directs more airflow to the space that needs it.

Low cost solution - About half the cost of zoning.

Eliminates installing bypass damper and duct.

Eliminates installing zoning panel, discharge air temperature sensor, transformer and upstairs thermostat.

Only 2-4 wires and 3 plug&play cables to connect compared to 25 wires in zoning.

Manual or optional Automatic Airflow Control.

Nighttime Airflow Control (Sleep Mode) for better comfort and energy savings at night.

FEATURES


  • About half the cost of zoning.
  • Simple Installation:
    • Eliminates installing bypass damper and duct.
    • Eliminates installing zoning panel.
    • Eliminates installing discharge air temperature sensor.
    • Eliminates installing transformer.
    • Eliminates installing upstairs thermostat.
  • Manual Airflow Control - 2 wires and 3 plug&play cables to connect compared to 25 wires in zoning.
  • Automatic Airflow Control - 4 wires and 3 plug&play cables to connect compared to 25 wires in zoning.
  • Modulating dampers adjust airflow in 2% increments.
  • Plug&play dampers eliminate wiring errors.
  • Reduced HERS testing.
  • Either, manually distributes airflow or if temperature sensor is installed upstairs, automatically distributes airflow for a uniformly comfortable home.
  • Use with any thermostat.
  • Use with a smart thermostat with a remote sensor for even greater comfort and energy savings.
  • Saves energy by reducing airflow to unoccupied spaces.
  • Nighttime Airflow Control (Sleep Mode) saves energy at night by distributing more heating or cooling to the sleeping space.
  • Save energy in heating by distributing more heating downstairs and satisfying the call sooner.




SPECIFICATIONS


  • HVAC Equipment - The DC365 does not control the HVAC equipment.
  • Thermostats - Use any thermostat.
  • LCD Display
  • Manual Operation - Press the up or down key to direct more heating or cooling airflow upstairs or downstairs.
  • Automatic Operation - DC365 monitors the temperatures upstairs and downstairs and automatically directs more airflow to space that needs it.
  • Airflow Adjustment Range - 40 to 160% of nominal airflow.
  • Modulating Dampers - Electronic motor control uses only 2VA when positioning damper and less than 1VA when holding position.
  • DC365 Connection - 50' plug&play cable included with control.
  • Sensor Connection - 2 Wire, 18 or 20 awg thermostat cable.
  • Damper Connection - 25' plug&play cable included with damper.
  • Power - 24VAC, 6VA.
  • Installation - Installed in a single gang box using screws provided.
  • Mechanical - 4.88 x 3.13 x .25 inches.




VIDEOS


Coming Soon




WHERE TO BUY


The DC365 for Aftermarket and New Construction is available through the following distributors:

  • Sigler
  • Air Cold Supply / Ferguson
  • Thermal Supply
  • Johnstone Supply
  • Thermal Supply
Having trouble finding the DC365? Give us a call at 949-916-6701 or email us for direct sales.